Akuvox A03S User Manual

A03S Access Control Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
11
10.2.Web Relay Setting
In additional to the relay that is connected to the access control terminal, you
can also control the door access using the network-based web relay on the
device and on the device web interface.
10.2.1. Configure Web Relay on the Web Interface
Web relay needs to set up on the web interface where you are required to fill
in such information as relay IP address, password, web relay action etc.
Before you can achieve the door access via web relay. To configure the
configuration on web Services > Web Relay interface.
Parameter Set-up:
 Type: select among three options Disabled, WebRelay and Both. Select
WebRelay to enable the web relay. Select Disable to disable the web relay.
Select Both to enable both local relay and web relay.
 IP Address: enter the web relay IP address provided by the web relay
manufacturer.

Akuvox A03S Specifications

General

Brand	Akuvox
Model	A03S
Category	IP Access Controllers
Language	English