A03S Access Control Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
User Name: enter the User name provided by the web relay manufacturer.
Password: enter the password provided by the web relay manufacturer.
The password is authenticated via HTTP and you can define the
passwords using “http get” in Action.
Web Relay Action: enter the specific web relay action command provided
by the web manufacturer for different actions by the web relay.
http://admin:admin@192.168.1.2/state.xml?relayState=2.
After the web relay is set up, you can configure the specific web relay to be
triggered based on the relay location for the door access. To configure the
configuration on web Directory > User > Access Setting interface. You need
to click +Add tab to turn to Access Setting interface.
To Next Page
Loading...
Need help?
General
