A03S Access Control Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com
12. Door Unlock Configuration
A03S access control terminal offer you three types of door access via RF
card. You can configure them on web interface. Moreover, you can import or
exporting the user configured files including access control information.
12.1.Configure RF Card for Door Unlock
12.1.1. Configure RF Card on the Web Interface
To configure the configuration on web Directory > User > RF Card interface.
You need to click +Add tab to turn to RF Card interface.
Note:
RF card with 13.56 MHz and 125 KHz can be applicable to the
access control terminal for the door access.
12.1.1.1. Configure RF Card Code Format
If you want to integrate with the third-party intercom system in terms of RF
card door access, you can change the RF card code format to be identical
with that applied in the third-party system. To configure the configuration on
web Hardware > Card Reader interface.
To Next Page
Loading...
Need help?
General
