2. Configuration
2.1 Basic setting in Phone interface
Press 3888+Dialing key to enter basic setting interface in door phone.
2.1.1 Status
Press 1 to enter status interface to check IP address ,Mac address and Firmware
version of the door phone.
2.1.2 RF Card
This function is only for quick adding cards. Press 2 , then you will see “RF Key
Learning...”, place your card in the card sensor area. “RF Key Learning+1” means
adding successfully. If you want to do more modification about RF card, please
configure in website.
2.1.3 Private Key
Press 3 to modify the public password of door phone. When you see “Enter
password:”, please input the 8 digital password ,press Dialing key to confirm. The
default password is 33333333.
User just input “ #+password+Dialing Key” t unlock the door.
2.1.4 Reset
Press 4 to reset the device.
To Next Page
Loading...
