To display and configure Local RTP settings.
Max RTP Port: Determine the maximum port that RTP
stream can use.
Starting RTP Port: Determine the minimum port that RTP
stream can use.
To display and configure SNMP settings.
Active: To enable or disable SNMP feature.
Port: To configure SNMP server’s port.
Trusted IP: To configure allowed SNMP server address, it
could be an IP address or any valid URL domain name.
Note: SNMP (Simple Network Management Protocols) is
Internet-standard protocol for managing devices on IP
networks.
To display and configure VLAN settings.
Active: To enable or disable VLAN feature for designated
port.
VID: To configure VLAN ID for designated port.
Priority: To select VLAN priority for designated port.
To Next Page
Loading...
