4. Save it after configuration.
In the Advanced Setting interface, press the Up or Down key on the phone keyboard
to select “WebServer,” press OK key on the phone keyboard or the Enter softkey to
access the disable/enable WebServer settings.
In the Advanced Setting interface, press the Up or Down key on the phone keyboard
to select “Reset to factory”, Press the OK key on the phone keyboard or the Enter
softkey to access the reset to factory interface.
This is a function to set the phone reboot.
1. In the Advanced Setting interface, press the Up or Down key on the phone
keyboard to select Reboot;
2.
Press the OK key or the Enter softkey to on the phone keyboard to enter the
reboot warning interface.
To Next Page
Loading...
Need help?
General
