54
Sections Description
Web Language To choose the web language.
LCD Language To choose the phone language.
Format Setting To configure time display settings.
Time Format: Determine what format to display on
Phone UI (12 hour/24 hour).
Date Format: Determine what format to display on
Display Mode: Determine what mode to display
Time&Date on Phone UI.
Type To select how to configure time, it could be set by manually
or get from INTERNET automatically via NTP server.
Manual: To set Time and Date manually.
Auto: To get Time via NTP server.
Note: If you set time to be Manually, it only tak effect till next
reboot, after reboot, the phone will switch to Auto mode
automatically, because there is no way for IP phone to record
time during power off.
NTP To configure NTP server related settings.
Time Zone: To select local Time Zone for NTP server.
Primary Server: To configure primary NTP server
Secondary Server: To configure secondary NTP server
address, it takes effect if primary NTP server is
unreachable.
Update interval: To configure interval between two
consecutive NTP requests.
Note: NTP, Network Time Protocol is used to automatically
synchronized local time with INTERNET time,since NTP server
only response GMT time, so that you need to specify the
Time Zone for IP phone to decide the local time.
Daylight Saving Time To display or configure DST settings.
Note: Here DST, is short for Daylight saving time, which
stands for the time in the summer days when sun rises early
will be adjusted forward to save daylight. The DST will take
effects during the period that set by user. (all the settings for
DST are all self-explanatory, please consult with your
administrator for local DST details).
Path: Web UI->Phone->Preference
To Next Page
Loading...
Need help?
General
