user=phone: If enabled, IP phone will send user=phone
PTime: Interval time between two consecutive RTP
Anonymous Call: If enabled, all outgoing call for the
designated account will be anonymous number.
Anonymous Call Rejection: If enabled, all incoming
anonym-out call for the designated account will be
rejected.
Is escape non Ascii character: To transfer the symbol to
Missed Call Log: To display the miss call log.
Prevent SIP Hacking: Enable to prevent SIP from hacking.
Music Server Address To display or configure third-party MOH(music-on-hold)
server.
Active: To enable or disable this MOH server,If enabled,
the IP phone will play MOH from configured server.
Music Server Address: To configure MOH server address.
Session Timer To display or configure session timer settings.
Active: To enable or disable this feature, If enable, the
ongoing call will be disconnected automatically once the
session expired unless it’s been refreshed by UAC or
UAS.
Session Expire: Configure session expire time.
Session Refresher: To configure who should be response
for refreshing a session.
Note: UAC means User Agent Client, here stands for IP
phone. UAS means User Agent Server, here stands for SIP
server.
BLF List To display or configure BLF List URI address.
BLF List URI: BLF List is short for Busy Lamp Field List.
BLFList PickUp Code: To set the BLF pick up code.
BLFList BargeIn Code: To set the BLF barge in code.
Broadsoft To display or configure Broadsoft AOC feature.
AOC: A feature used to be accounting on Broadsoft
platform.
Note: Please consult your administrator further information.
Encryption To enable or disabled SRTP feature.
Voice Encryption (SRTP): If enabled, all audio signal
(technically speaking it’s RTP streams) will be encrypted
for more security.
NAT To display NAT-related settings.
UDP Keep Alive message: If enabled, IP phone will send
UDP keep-alive message periodically to router to keep