ALBIN PUMP ALH - Default Chapter; Table of Contents

2 albinpump@irco.com  Albinpump.com  Albin Pump ALH Instruction Manual
since 1928
1 | HOW TO USE THIS MAINTENANCE MANUAL .................................... 4
2 | PUMP USE AND TRAINING .................................................. 4
2.1 - Use of the pump ....................................................4
2.2 - Responsibility
......................................................4
2.3 - Training and instructions
..............................................4
3 | DESCRIPTION ............................................................. 5
3.1 - Product identication ................................................5
3.2 - Operation principle
..................................................5
3.3 - Pump construction
..................................................6
3.3.1 - Pumps ALH05 to ALH20
.........................................6
3.3.2 - Pumps ALH25 to ALH65
.........................................7
3.3.3 - Pumps ALH80 to ALH125
........................................8
3.4 - Pump hose
........................................................9
3.5 - Pump gearbox
.....................................................9
3.6 - Electrical Motor
.....................................................9
3.7 - Available Options
...................................................9
4 | INSTALLATION .............................................................10
4.1 - Unpacking and control ..............................................10
4.2 - Conditions of installation
............................................10
4.3 - Setup
...........................................................10
4.4 - Piping
...........................................................10
4.5 - Pump lifting
.......................................................11
5 | PUMP START-UP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5.1 - Preparations ......................................................11
5.2 - Pump start-up
.....................................................11
6 | MAINTENANCE ............................................................11
6.1 - Emptying and lling of the lubricant ....................................11
6.2 - Hose cleaning
.....................................................13
6.3 - Hose replacement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6.3.1 - Removing the hose
............................................13
6.3.2 - Cleaning of the pump casing
....................................15
6.3.3 - Reassembly of the hose
........................................15
6.4 - Replacement of spare parts
..........................................17
6.4.1 - Replacement of pump shoes (except ALH05, ALH10, ALH15, ALH20) ....17
6.4.2 - Replacement of the seal ring (REF 27) and the shaft seal (REF 26) .......18
6.5 - Shoe shimming
.................................................... 21
6.6 - Maintenance and periodical controls
...................................22
6.7 - ALHS series complementary information
................................23
6.7.1 - Set up
......................................................23
6.7.2 - Pump starting
................................................23
6.7.3 - Bearing case dismantling and lip seal (REF 26) replacement
............23
6.7.4 - Maintenance and periodical controls
..............................23
ALH
Table of Contents