ALBIN PUMP ALH - Generated Noise and Temperature

48 albinpump@irco.com  Albinpump.com  Albin Pump ALH Instruction Manual
since 1928
ALH
Characteristics / Technical Specications
9.9 - GENERATED NOISE AND TEMPERATURE
NOISE :
The ALBIN PUMPS do not generate more than 60dB during their operation.
TEMPERATURE :
The cover and the pump casing can become very hot due to the friction on the hose and liquid
temperature. If you need to limit the pump temperature, please contact your ALBIN PUMP distributor.
PUMP TYPE ALH50
Pressure bar (psi) Speed - Rpm
Number of
shims
ΔP ≤ 5 (72.5)
0 to 30 0
30 to 100 0
5 (72.5) ≤ ΔP ≤ 7.5 (108.75)
0 to 30 2
30 to 65 1
7.5 (108.75) ≤ ΔP ≤ 10 (145)
0 to 30 3
30 to 50 2
10 (145) ≤ ΔP ≤ 15 (217.5)
0 to 30 4
30 to 42 3
PUMP TYPE ALHX65 AND ALHX80
Pressure bar (psi) Speed - Rpm
Number of
shims
ΔP ≤ 5 (72.5)
0 to 25 0
25 to 65 0
5 (72.5) ≤ ΔP ≤ 7.5 (108.75)
0 to 25 2
25 to 46 1
7.5 (108.75) ≤ ΔP ≤ 10 (145)
0 to 25 3
25 to 40 2
10 (145) ≤ ΔP ≤ 15 (217.5)
0 to 25 4
25 to 31 3
PUMP TYPE ALH65
Pressure bar (psi) Speed - Rpm
Number of
shims
ΔP ≤ 5 (72.5)
0 to 30 0
30 to 90 0
5 (72.5) ≤ ΔP ≤ 7.5 (108.75)
0 to 30 2
30 to 55 1
7.5 (108.75) ≤ ΔP ≤ 10 (145)
0 to 30 3
30 to 47.5 2
10 (145) ≤ ΔP ≤ 15 (217.5)
0 to 30 4
30 to 40 3
PUMP TYPE ALH80
Pressure bar (psi) Speed - Rpm
Number of
shims
ΔP ≤ 5 (72.5)
0 to 20 0
20 to 60 0
5 (72.5) ≤ ΔP ≤ 7.5 (108.75)
0 to 20 2
20 to 47 1
7.5 (108.75) ≤ ΔP ≤ 10 (145)
0 to 20 3
20 to 37 2
10 (145) ≤ ΔP ≤ 15 (217.5)
0 to 20 4
20 to 31 3
PUMP TYPE ALH100
Pressure bar (psi) Speed - Rpm
Number of
shims
ΔP ≤ 5 (72.5)
0 to 15 0
15 to 50 0
5 (72.5) ≤ ΔP ≤ 7.5 (108.75)
0 to 15 2
15 to 32.5 1
7.5 (108.75) ≤ ΔP ≤ 10 (145)
0 to 15 3
15 to 25 2
10 (145) ≤ ΔP ≤ 15 (217.5)
0 to 15 4
15 to 20 3
PUMP TYPE ALH125
Pressure bar (psi) Speed - Rpm
Number of
shims
ΔP ≤ 5 (72.5)
0 to 10 0
10 to 35 0
5 (72.5) ≤ ΔP ≤ 7.5 (108.75)
0 to 10 2
10 to 27.5 1
7.5 (108.75) ≤ ΔP ≤ 10 (145)
0 to 10 3
10 to 25 2
10 (145) ≤ ΔP ≤ 15 (217.5)
0 to 10 4
10 to 20 3