ALBIN PUMP ALH - Page 53

Albin Pump ALH Instruction Manual  Albinpump.com  albinpump@irco.com 53
since 1928
SUMMARY
1 - Level of pumps certification
2 - Protection of the pumping part
3 - Protection of the transmission part
4 - Particular dispositions when using a frequency inverter
5 - Dry running the pumps
6 - Replacement of parts
7 - Solvents incompatible with pump seals
8 - Possible leakage of pumped liquid
9 - Checking lubricant level in the pump
10 - Drive of the pump
10.1 Alignment of the pump and the drive (only for the ALHS pump)
10.2 Flexible couplings
10.3 Electric installation of the motor or the motor reducer of the pump
10.4 ATEX characteristics of the motor or the motor reducer of the pump
11 - ATEX characteristics of the pumping installation
12 - Pumping vat of retention
13 - Marking of the pump
ALH
Supplemental Instructions
for ATEX Certied Materials