— 9 —
Section Header
The AWS4388 Wireless Surveillance System supports
up to four (4) wireless surveillance cameras. This section
allows you to add the camera, if you have purchased
addition cameras or change original camera channel.
NOTE: Before leaving factory, the cameras within the AWS4388 system have been matched with monitor, the image
from the camera will come out when the system is powered.
TIP: When adding cameras, it is
recommended to pair camera near your
Observer HD+ monitor. Once paired position
your camera to its desired location. Camera
must still be within Wi-Fi range of the monitor.
EXPANDABLE
up to 4 cameras
Ask your retailer for accessory
cameras compatible with this system.
Pair New Camera
X
X
X
X
Pair New Camera
Stop Add
X
X
X
X
Pair New Camera
E
Mute Home Search
Playback
B
D
Video Playback System SetupRecording Setup
Camera InfoMotion Alerts Manage System
When pairing add-on cameras, plug camera
into power outlet close to the monitor
before installing to your desired location.
Tap the Monitor touchscreen and select
the HOME icon to get to the Main Menu
Select the CAMERA INFO icon to get
to the Camera Pairing Screen with
MATCH CODE
Tap PAIR NEW CAMERA and the
system will search for the new
camera’s Wi-Fi signal and will
automatically pair it with the monitor.
The status will change on the next
available Camera position from
“Not Paired” to “Paired” and a code
will appear next to the camera added.
Tap STOP ADD to complete the process.
Select the BACK button (<) twice
to return to the main menu. After
successful pairing, install your new
add-on camera
to its desired location.
A
B
C
D
E
F
G
CAMERA PAIRING
Pairing Additional Cameras To Monitor
To Next Page
Loading...
General