Alcatel-Lucent 7330 - Page 234

5 — VoIP overview
5-34 March 2011 Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
ONT Product Information Guide Edition 01 3FE 54199 AAAA TCZZA
outbound_uri_prefix
(1)
A string added as a prefix to the
dialed digits to form the Request
URI and the To URI when sending
an INVITE request to the
softswitch. This is a sting of up to
99 characters and is an optional
parameter. The default value is
“sip.” The FTP XML name of this
parameter is shown as
OutboundURIPrefix
The outbound_proxy value is
superseded for INVITE requests if
the outbound_uri_suffix value is
configured.
• outbound_uri_prefix
(1)
+
dialed number + @ +
outbound_proxy when the
oubound_uri_suffix value is
not configured
• outbound_uri_prefix
(1)
+
dialed number +
outbound_uri_suffix when the
oubound_uri_suffix value is
configured
For other devices, the default is
“sip:” that cannot be changed
YYPackage
A, B, H
only
No, value is
derived
from
FTP/default
line profile.
N/A
outbound_uri_suffix A string that is added as a suffix to
the dialed digits to form the
Request URI and the To URI when
sending an INVITE request to the
softswitch. The specified string is
added as is if the string contains an
@ character. If an @ character is
not present, then @ is prefixed to
the specified value. This string of
up to 99 characters is an optional
parameter. The default value is
“@” + outbound_proxy. The FTP
XML name of this parameter is
shown as OutboundURISuffix.
The outbound_proxy value is
superseded for INVITE requests if
the outbound_uri_suffix value is
configured.
• outbound_uri_prefix
(1)
+
dialed number + @ +
outbound_proxy when the
oubound_uri_suffix value is
not configured
• outbound_uri_prefix
(1)
+
dialed number +
outbound_uri_suffix when the
oubound_uri_suffix value is
configured
For other devices, the default is an
empty string that cannot be
changed.
YYPackage
A, B, H
only
No, value is
derived
from
FTP/default
line profile.
N/A
Parameter Description Mode
1
Mode
2
Device OMCIv2
support?
TL1 or CLI
parameters
(2 of 23)