Alcatel-Lucent 7330 - Page 237

5 — VoIP overview
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a March 2011 5-37
3FE 54199 AAAA TCZZA Edition 01 ONT Product Information Guide
intercom_code_1 A set of one or more home
intercom service codes for alerting
pattern 1. This reflects that fact
that in typical dial plans there are
two equivalent ways to dial a given
service code. This is a string. The
value of this property may include
up to two service codes, each up to
6 characters long, separated by
white space. The default is “*53
1153.”
For other devices the setting is
“*53 1153” and cannot be changed.
NYPackage
A, B, H
only
Yes, but
only one
intercom
code is
supported
TL1 using
INTERCOM
using
ent-profile-a
cccodes
CLI using
intercom
using
configure
voice ont
feat-acccode
-prof
intercom _code_2 A set of one or more home
intercom service codes for alerting
pattern 2. This reflects that fact
that in typical dial plans there are
two equivalent ways to dial a given
service code. This is a string. The
value of this property may include
up to two service codes, each up to
6 characters long, separated by
white space. The default is “*54
1154.”
For other devices the setting is
“*53 1154” and cannot be changed.
NYPackage
A, B, H
only
No, value is
derived
from
FTP/default
line profile.
N/A
enable_cw Indicates whether the call waiting
service is enabled. This is a string
containing a value of “yes” or
“no.” The default value is “yes.”
YYAll Yes, enabled
if both call
waiting and
caller ID are
configured
TL1 using
CALLWAIT set
to 3 using
ent-profile-v
oipappservic
e
CLI using
c a l l - w a i t i n g
using
configure
voice ont
voip-app-serv
ice
business_cw Indicates whether the business
group variant of the call waiting
service is enabled. This is a string
containing a value of “yes” or
“no.” The default value is “no.”
YYAll
except
package
C, D,
and E
No, value is
derived
from
FTP/default
line profile.
N/A
enable_3wc Indicates whether 3-way
conference service is enabled. This
is a string containing a value of
“yes” or “no.” The default value is
“no.”
NYAll Yes TL1 using
CALLPROGTR
AN set to 1
using
ent-profile-v
oipappservic
e
CLI using
three-way-ca
lling
using
configure
voice ont
voip-app-serv
ice
Parameter Description Mode
1
Mode
2
Device OMCIv2
support?
TL1 or CLI
parameters
(5 of 23)