Alcatel-Lucent 7330 - Page 238

5 — VoIP overview
5-38 March 2011 Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
ONT Product Information Guide Edition 01 3FE 54199 AAAA TCZZA
enable_6wc Indicates whether 6-way
conference service is enabled. This
is a string containing a value of
“yes” or “no.” The default value is
“no.”
NYPackage
A, B, H
only
Yes TL1 using
CALLPROGTR
AN set to 80
using
ent-profile-v
oipappservic
e
CLI using
six-way-callin
g using
configure
voice ont
voip-app-serv
ice
enable_transfer Indicates whether the call transfer
service is enabled. This is a string
containing a value of “yes” or
“no.” The default value is “no”.
NYAll Yes TL1 using
CALLPROGTR
AN set to 2
using
ent-profile-v
oipappservic
e
CLI using
call-transfer
using
configure
voice ont
voip-app-serv
ice
enable_hold Indicates whether the call hold
service is enabled. This is a string
containing a value of “yes” or
“no.” The default value is “no”.
NYAll Yes TL1 using
CALLPROGTR
AN set to 4
using
ent-profile-v
oipappservic
e
CLI using
call-hold
using
configure
voice ont
voip-app-serv
ice
enable_supp_ring Indicates whether the suppressed
ringing service is enabled. This is a
string containing a value of “yes”
or “no.” The default value is “no”.
NYPackage
A, B, H
only
No, value is
derived
from
FTP/default
line profile.
N/A
Parameter Description Mode
1
Mode
2
Device OMCIv2
support?
TL1 or CLI
parameters
(6 of 23)