Establishing Router Management Connections
130 7750 SR-a4 and SR-a8 Installation Guide
MAC addresses are listed on the small labels on the chassis, IOM-a, and MDA-a. The MAC
address also appears in the show router arp command output.
Figure 43: CPM Management Port Connection
CLI Syntax: bof
address ip-address/mask [active | standby]
For pinout information, see Management Port Pinouts on page 215.
Running Telnet
After the IP parameters are configured, the CLI can be accessed with a Telnet connection. To
establish a Telnet connection, run a Telnet program and issue the Telnet command, followed
by the IP address.
The following is an example of a Telnet login:
C:\>telnet 192.168.1.xx1
Login: admin
Password: #####
ALU-1#
The default login is admin.
The default password is admin.
Alarms
1PPS
ACO/LT
Critical
Lnk
DTE
Pwr
7750 CPM-a
Stat
Console
Mgmt OES
SyncE/1588
BITS
Compact Flash
DCE
Act Lnk Act
Major Minor
24565
Management Port
To Next Page
Loading...
