Alcatel-Lucent 7750 SR-a8 - Table 36 Attaching ETSI Adapter Brackets; Figure 20 Attaching the 13-RU ETSI Adapter Brackets to the 7750 SR-A8 Chassis

Installing the 7750 SR-a Chassis
7750 SR-a4 and SR-a8 Installation Guide 81
Figure 20: Attaching the 13-RU ETSI Adapter Brackets to the 7750 SR-a8 Chassis
Required tools:
• a #3 Phillips torque driver for the supplied Phillips screws
7
75
0
S
R-a8
Se
r
vice R
outer
Air F
ilt
e
r
A
c
c
e
s
s
7
750
S
R
-a
8
24658
3 2 1
Table 36: Attaching ETSI Adapter Brackets
Key Description
1 ETSI adapter bracket (two supplied in the accessory kit). The round threaded
holes are used to attach the adapter to the chassis mounting flange.
2 Integrated rack-mounting flange on the chassis. Flanges cannot be removed.
3 Eight 12-24 Phillips screws to mount ETSI adapter brackets to the chassis
(supplied in the accessory kit)