Alcatel-Lucent 7750 SR-a8 - Power Consumption; 1-Port 100 Gige CFP MDA-Axp Leds; Table 62 1-Port 100 Gige CFP MDA-A Power Consumption Values in Watts; Table 63 1-Port 100 Gige CFP MDA-Axp Leds

Appendix B: MDA-a and MDA-aXP Card Descriptions
7750 SR-a4 and SR-a8 Installation Guide 149
Power Consumption
Table 62 lists the power consumption values for the 1-port 100GigE CFP MDA-a.
Note:
1. Idle: Slots not configured or provisioned
2. Zero Traffic: Traffic load: 0% line rate at 25ºC (reset case)
3. Typical: Traffic load: 50% line rate with Internet mix (IMIX) at 25ºC
4. Worst Case: Traffic Load: 100% line rate with IMIX at the maximum short duration and at high temperature
(65ºC)
1-port 100GigE CFP MDA-aXP LEDs
Figure 49 shows the 1-port 100GigE CFP MDA-aXP. Table 63 describes the LEDs.
Weight 2.76 lb (1.25 kg)
Table 61: 1-port 100GigE CFP MDA-a Specifications (Continued)
Parameter Description
Table 62: 1-port 100GigE CFP MDA-a Power Consumption Values in Watts
Idle
1
Zero Traffic
2
Typical
3
Maximum Power
4
0 52 56 75
Table 63: 1-port 100GigE CFP MDA-aXP LEDs
Label Description LED Display
Pwr / Stat Power and Status
LED
Green (slow blink): The MDA-a is loading the firmware and running
diagnostics.
Green (solid): The MDA-a has successfully completed loading the
firmware and running diagnostics, and is operationally up and
administratively up.
Amber (solid): The MDA-a is operationally down but administratively up.
Unlit: The MDA-a is operationally down and administratively down.