Alcatel-Lucent 7750 SR-a8 - Making the Ground Connection; Table 38 Ground Wiring Parts; Figure 23 Preparing the Ground Wire

Chassis Ground Wiring
86 7750 SR-a4 and SR-a8 Installation Guide
Figure 23: Preparing the Ground Wire
Making the Ground Connection
Figure 24 shows how to attach the ground wire to the chassis. Table 39 describes the parts.
Table 38: Ground Wiring Parts
Key Description
1 Copper ground wire with green or green/yellow colored insulation jacket,
minimum #8 AWG (not supplied)
2 Insulation stripped 7/8 in. (22.23 mm) according to Burndy specification.
3 Two-hole ring lug, Burndy YAZ8C2TC1045, Alcatel-Lucent PN 52-1178-01
(supplied in the accessory kit)
3
2
1
24650