Alcatel-Lucent 8242 - Adjusting Your Telephone Functions

8242 DECT Handset
8AL90311USADed01
44 /83
7.6 Adjusting your telephone functions
 Access MENU.
 Settings
 Select the function* you want and use the On/Off softkeys to activate or deactivate the
function.
 OR.
 Select the function* you want and press the OK key to enter the function menu to
configure the function.
 Return to idle.
* *You can activate or disable the following functions:
 Status To show Handset information such as the software version, the battery level, etc.
 Ascending ringing Activate or deactivate the ascending ringtone (Progressive ringing).
 Coverage warning To activate or deactivate Bip emission when your phone is out of DECT area
coverage.
 Charger warning To activate or deactivate Bip emission when placing handset on charger.
 Low bat. warning Activate or deactivate Bip emission when low battery level is reached.
 Key sound Activate or deactivate the keypad tone.
 Confirmat. sound When a setting is updated, a confirmation sound is played.
 Headset mode Activate or deactivate the headset mode. When activated only the headset rings (if
plugged in).
 Force calendar ring Activate/deactivate an audio signal, regardless of the ringer setting, when you
receive an appointment reminder.
 Economy mode Activate or deactivate the economy mode. When the economy mode is activated, the
set adjusts its radio emission power according to the distance between the set and the radio base. The
closer the set is to the radio base, the lower is the radio emission from the phone. This means that the
phone is not always emitting at full power and thus saves the battery.
 Vibrate/Ring You can adjust the buzzer/ringer mode according to your needs.
 Vibrator Shortcut Activate or deactivate the vibrate shortcut ( ).
 Lock To activate or deactivate a timeout to trigger the automatic keylock.
 Reset settings Reset the setting and go back to the default settings.
 Select System To select any administrator-defined DECT network for your handset or auto. select.
 System settings Administrator access to system configuration.
 Keys To access the configuration and programming of handset keys.
o 2s key repeat For people with a disability, increases the repeat-key delay for the dial by name
feature.
 Language Choose a language other than system language.
 Dock settings Define how the phone behaves when installed in its charger dock.
 Bluetooth Access the Bluetooth feature (enable/disable, search for devices, etc.).
 Noise reduction Activate or deactivate reduction of the ambient noise.