User Manual
Product information and planning
9500 MPR Rel. 3.1
3DB18809AAAA Issue 1 143/980
MPT-HC is broken down to the following sections:
– MPT-CB: Common Belt section. This section is Frequency independent, and all the features relevant
to this unit are common to all the MPT RF options.
– MPT-RF: Radio Frequency section that is frequency dependent.
Figure 61. MPT system
The MPT-HC interface is based on a Gb Ethernet, that can be either optical or electrical depending on
the needs and the cable length. If the optical port has/have to be used (data and/or RPS port), the cor
-
responfing SFP plug-in must be installed by opening the Cobox.
Figure 62. 11-38 GHz MPT-HC housing
Figure 63. 6 GHz MPT-HC housing
To Next Page
Loading...
