EasyManua.ls Logo

Alcatel-Lucent 9500 MPR - Table 32. RR Weights

Alcatel-Lucent 9500 MPR
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Manual
Product information and planning
9500 MPR Rel. 3.1
3DB18809AAAA Issue 1186/980
e.g. MDCR = 1000 [cell/s] -> Weight = 4
An UBR has MDCR=0 -> weight = 1
Table 32. RR weights
N.B. ATM “Light” Service
With MPT-HC or MPT-MC there is no full support of ATM Traffic as with ODU300, but the so-
called ATM “Light” Service applies.
In this release, ATM PW traffic will be transported as native Ethernet traffic over radio directions
with MPT ODU.
Radio QoS applied to ATM PW traffic will be the one for native Ethernet traffic, but since band-
width cannot be guaranteed, admission control will not be applied.
Transport of ATM PW traffic within an MPR network must be done with radio links using all the
same type of ODU, either ODU300 or MPT ODU.
To avoid NE reconfiguration in migration towards future release fully supporting ATM PW Ser-
vice on radio directions with MPT ODU, a complete provisioning is applied since this release
(including declaration of traffic descriptors).
However, configurations where ATM PW flows are cross-connected between a Radio-Ethernet
terminal and an ATM-Ethernet terminal will require NE reconfiguration, as different MAC
Address need to be provisioned.
MDCR [cell/s] RR Weight
<= 149 1
<= 300 2
<= 602 3
<= 1206 4
<= 2413 5
<= 3621 6
<= 4529 7
>= 4530 8

Table of Contents

Other manuals for Alcatel-Lucent 9500 MPR

Related product manuals