User Manual
Product information and planning
9500 MPR Rel. 3.1
3DB18809AAAA Issue 180/980
2.3 Standard Features
More radio and site scalability and flexibility for installation teams:
– Limited need for factory presetting channel frequency or bandwidth
– Interchangeable hardware units
– Supports cellular mobile networks, and microcellular network back and common carrier, private
carrier and data networks, and utility haul applications.
– 2G, 2.5G, and 3G network compatible
– Intelligent indoor nodal unit that supports up to 12 outdoor units, expandable to 36 with the stacking
configuration (with MPT)
– Flexible aggregate capacity sharing between E1, STM-1 and Ethernet
– Adaptive packet transport that improves performance for priority services
– Output power agility
–ATPC
– Adaptive Modulation
– XPIC
– Packet-based internal cross-connect
– E1 MEF8 encapsulation
– STM-1 encapsulation
– EoSDH feature
– ATM over PW according to RFC 4717
– Radio and Ethernet LAGs
– Ethernet Ring
– Electrical and optical GE interfaces
– Software-based configuration
– Multiservice Switching Capacity greater than 16 Gb/s
– No single point of failure
To Next Page
