User Manual
Product information and planning
9500 MPR Rel. 3.1
3DB18809AAAA Issue 156/980
2.1.8 MPT-HC V2
MPT-HC V2 is similar to MPT-HC from architecture standpoint and can be used as spare part of the MPT-
HC. The differences are:
– MPT-HC V2 can be natively Ethernet powered through a proprietary PFoE (or as alternative by using
two cables, one coaxial cable for the Power Supply and one optical cable for the Ethernet Traffic (as
MPT-HC)
– MPT-HC V2 is XPIC-ready by the installation of a dedicated module.
Figure 15. MPT-HC V2
To Next Page
Loading...
