User Manual
Product information and planning
9500 MPR Rel. 3.1
3DB18809AAAA Issue 1 179/980
Figure 88. Traffic profiles
In these cases Ethernet packets enter Node 1 and are extracted in Node 2. In case 4 the Ethernet packets
encapsulate the E1 stream; in case 5 the packets are native Ethernet packets. None of the IWFs belongs
to the 9500 MPR-E network. The Circuit Emulation Service is ETH2ETH in Node 1 and Node 2. No Cross
connections must be implemented. The path is automatically implemented with the standard auto-
learning algorithm of the 9500 MPR-E Ethernet switch.
Case 4 and 5
To Next Page
Loading...
