User Manual
Product information and planning
9500 MPR Rel. 3.1
3DB18809AAAA Issue 1 57/980
2.1.9 Power Extractor
The Power Extractor is an Outdoor Device, to be installed close to the MPT-HC, which receives on one
cable the “Power Feed over Ethernet” (Ethernet traffic and Power Supply), provided by the MPT Access
unit, and separates the Power Supply from the Ethernet traffic to be separately sent to the MPT-HC.
Figure 16. shows the Power Extractor.
Figure 16. Power Extractor
The Power Extractor has 3 connectors:
– DC+DATA In (PFoE from the MPT Access unit)
– DC Out (Power Supply to MPT-HC)
– Data Out (Ethernet traffic to MPT-HC)
To Next Page
Loading...
