User Manual
Product information and planning
9500 MPR Rel. 3.1
3DB18809AAAA Issue 170/980
2.1.10.4 How to connect the MPT-HC/MPT-HC V2 to the station battery
Figure 29. shows the devices used to connect an MPT directly to a battery.
From front to back:
– Coaxial cable with N connector
– Wall mount support 3CC50149AAXX (max 4 MPT)
– Lightning arrestor with its grounding cable
– Low pass filter
– Cable N to two wires ("pigtail")
Figure 29. MPT-HC/MPT-HC V2 directly connected to the battery
To Next Page
Loading...
