H2 DeskPhone
H2P DeskPhone
8AL90394ENAAed01 57 /111
10 Telephone Settings
10.1 Basic settings
10.1.1 Language
The user can set the telephone language through the telephone interface and web interface.
⚫ Telephone end: After resetting the factory settings, the user needs to set the language; when setting the
language during standby, go to [Menu] >> [Basic] >> [Language] settings, as shown in the figure.
Figure 75 – Setting the telephone language
⚫ Web interface: Log in to the telephone web page and set the language in the drop-down box at the top
right corner of the page, as shown in the figure:
Figure 76 – Setting the language on the web page
10.1.2 Time & date
Users can set the telephone time via the web interface.
⚫ Web interface: Log in to the telephone web page and go to [Phone Settings] >> [Time/Date] , as
shown in the figure:
To Next Page
Loading...
