Alcatel-Lucent H2 DeskPhone - Screen

H2 DeskPhone
H2P DeskPhone
8AL90394ENAAed01 59 /111
◼ DD-MM-YY
◼ DD-MM-YYYY
◼ MM-DD-YY
◼ MM-DD-YYYY
◼ YY-MM-DD
◼ YYYY-MM-DD
Separator
Choose the separator between year and month and day
12-Hour Clock
Display the clock in 12-hour format
Daylight Savings Time
Enable or disable Daylight Savings Time
10.1.3 Screen
The user can set the telephone screen parameters via both the telephone interface and web interface.
⚫ Telephone: When the telephone is in the default standby status, go to [Setting] >> [Phone] >>
[Display] to edit the screen parameters. After editing, click [OK] to save, as shown in the figure:
Figure 78 - Setting screen parameters on the telephone
⚫ Web: Go to [Phone Settings] >> [Advanced], edit the screen parameters, and click Apply to save.
10.1.3.1 Brightness and backlight
⚫ Set the brightness level from 1 to 16, [<] or [>] to change the brightness level.
⚫ Set the brightness level in the energy-saving mode from 0 to 16, [<] or [>] to change the brightness
level.
⚫ Set the backlight time to 30 seconds by default. You can turn it off or select 15 seconds /30 seconds
/45 seconds /60 seconds /90 seconds /120 seconds.
⚫ The screen saver can be turned on or off by default.
⚫ Web interface: Go to [Phone Settings] >> [Advanced], edit the screen parameters, and click submit to
save.
Figure 79 – Screen settings on the web