Alcatel-Lucent H2 DeskPhone - Factory Reset

H2 DeskPhone
H2P DeskPhone
8AL90394ENAAed01 76 /111
10.6.6 Factory reset
The telephone is in default standby mode.
⚫ Press [Setting]>[Admin], and press the OK key.
⚫ Enter the password (default password is 123456) to enter the interface.
⚫ Select [Restore factory] and press the OK key. Select the file to be cleared.
⚫ Press [OK] to clear after completion.
When you select “clear configuration file” or “clear all”, the telephone will restart automatically after
clearing.