Alcatel-Lucent H2 DeskPhone - Firmware Upgrade

H2 DeskPhone
H2P DeskPhone
8AL90394ENAAed01 74 /111
ACS Server Type
There are 2 server type options, common and CTC.
ACS Server URL
ACS server address
ACS User
ACS server username (up to 59 characters)
ACS Password
ACS server password (up to 59 characters)
Enable TR069 Warning
Tone
If TR069 is enabled, there will be a prompt tone when connecting.
TLS Version
TLS version (TLS 1.0, TLS 1.1, TLS 1.2)
INFORM Sending Period
INFORM signal interval time, which ranges from 1 second to 999 seconds.
STUN Server Address
Configure STUN server address
STUN Enable
To enable STUN server for TR069
10.6.5 Firmware upgrade
⚫ Web page: Log in to the telephone web page, go to [Status] >> [Upgrade].
Figure 110 - Web page firmware upgrade
Table 16 - Firmware Upgrade
Parameter
Description
Upgrade server
Enable Auto Upgrade
Enables automatic upgrade. If there is a new version txt and new
software or firmware on the server, the telephone will show a
prompt upgrade message after the update interval.
Upgrade Server Address1
Set available upgrade server address.
Upgrade Server Address2
Set available upgrade server address.
Update Interval
Set update interval.
Firmware Information
Current Software Version
This will show the current software version.