Alcatel-Lucent H2 DeskPhone - Page 73

H2 DeskPhone
H2P DeskPhone
8AL90394ENAAed01 73 /111
Information
is kept, the information will be kept.
Download Common
Config enabled
Whether the telephone will download the common configuration file.
Enable Server Digest
When this feature is enable, if the configuration of the server is changed,
the telephone will download and update.
DHCP Option
Option Value
Configuring the DHCP option: The DHCP option supports the DHCP custom
option | DHCP option 66 | DHCP option 43, i.e., 3 methods to get the
provision URL. The default is Option 66.
Custom Option Value
A Custom option value from 128 to 254 is allowed. The option value must
be the same as the one defined by the server.
Enable DHCP Option 120
Use Option 120 to get the SIP server address from the DHCP server.
SIP Plug and Play (PnP)
Enable SIP PnP
Whether PnP is enabled or not. If PnP is enabled, the telephone will send a
SIP SUBSCRIBE message by broadcast method. Any server that can
support the feature will respond and send a notification with URL to the
telephone. This enables the telephone to get the configuration file with the
URL.
Server Address
Broadcast address. Default is 224.0.0.0.
Server Port
PnP port
Transport Protocol
PnP protocol, TCP or UDP.
Update Interval
PnP message interval.
Static Provisioning Server
Server Address
Provisioning server address. Supports both IP address and domain
address.
Configuration File Name
The configuration file name. If it is empty, the elephone will request the
common file and device file which is named as its MAC address.
The file name could be a common name such as $mac.cfg, $input.cfg. The
file format supports CFG/TXT/XML.
Protocol Type
Transfer protocol type: supports FTP、TFTP、HTTP and HTTPS
Update Interval
Configuration file update interval time. The default is 1. This means that the
telephone will check the update every 1 hour.
Update Mode
Provision Mode.
1. Disabled.
2. Update after reboot.
3. Update after interval.
TR069
Enable TR069
Enable TR069 after selection.