Alcatel-Lucent H2 DeskPhone - Telephone Settings >> Features

H2 DeskPhone
H2P DeskPhone
8AL90394ENAAed01 90 /111
12.7 Telephone settings >> Features
Configuration of telephone features.
Table 22 - General Function Settings
Parameters
Description
Basic Settings
Enable Call Waiting
Enables this setting to allow user to take a second incoming call during an
established call. Default enabled.
Enable Call Transfer
Enables call transfer.
Semi-Attended Transfer
Enables semi-attended transfer when selected.
Enable 3-Way Conference
Enables 3-way conference when selected.
Enable Auto Onhook
The telephone will hang up and return to idle automatically in hands-free
mode.
Auto HangUp Delay
Specifies Auto Onhook time. The telephone will hang up and return to idle
automatically after Auto Hand down time in hands-free mode, and play dial
tone Auto Onhook time in handset mode.
Ring From Headset
Enables Ring from Handset when selected. The telephone plays the ring
tone from the handset.
Enable Auto Headset
To enable this feature, the headset is plugged into the telephone, the user
presses the ‘answer’ key or line key to answer a call with the headset
automatically.
Enable Silent Mode
When enabled, the telephone is muted and there is no ringing when calls
come in. You can use the volume keys and mute key to unmute.
Disable Mute for Ring
When this is enabled, you cannot mute the telephone.
Enable Default Line
If enabled, the user can assign a default SIP line for dialing out rather than
SIP1.
Enable Auto Switch Line
Enables the telephone to select an available SIP line as default
automatically.
Default Ext Line
Selects the default line to use for outgoing calls.
Ban Outgoing
If you select Ban Outgoing to enable it, and you cannot dial out any
number.
Hide DTMF
Configures the hide DTMF mode.
Enable Call Log
Selects whether to save the Call Log.
Enable Restricted
Incoming List
Selects whether to enable restricted call list.
Enable Allowed Incoming
List
Selects whether to enable the allowed call list.