EasyManua.ls Logo

Alcatel-Lucent H2 DeskPhone - Page 91

Alcatel-Lucent H2 DeskPhone
111 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
H2 DeskPhone
H2P DeskPhone
8AL90394ENAAed01 91 /111
Enable Restricted
Outgoing List
Selects whether to enable the restricted allocation list.
Enable Country Code
Selects whether the country code is enabled.
Country Code
Fills in the country code.
Area Code
Fills in the area code.
Enable Number Privacy
Selects whether to enable number privacy.
Match Direction
Matches direction. There are two kinds of rules, from right to left and from
left to right.
Start Position
Opens number privacy after the start of the hidden location.
Hide Digits
Turns on number privacy to hide the number of digits.
Allow IP Call
If enabled, the user can dial out with the IP address
P2P IP Prefix
Prefix a point-to-point IP call.
Caller Name Priority
Changes caller ID display priority.
Emergency Call Number
Configures the Emergency Call Number. Even if the keyboard is locked,
you can dial the emergency call number.
Search path
Selects the search path.
LDAP Search
Selects with one LDAP for search.
Caller Display Type
Selects whether to display name or number.
Restrict Active URI Source
IP
Sets the device to accept Active URI command from specific IP address.
Push XML Server
Configures the Push XML Server. When the telephone receives a request,
it will determine whether to display corresponding content on the telephone
which is sent by the specified server or not.
Enable Pre-Dial
Disables thed feature in which the audio channel is automatically opened
when the user enters a number.
When the feature is enabled, the user can enter the number without
opening the audio channel.
Enable Multi Line
If enabled, up to 10 simultaneous calls can exist on the telephone, and if
disabled, up to 2 simultaneous calls can exist on the telephone.
Line Display Format
Custom line format: SIPn/SIPn: xxx/xxx@SIPn
Contact As White List Type
NONE/BOTH/DND White List/FWD White List
Block XML When Call
Disables XML push on call.
SIP notify
When enabled, the telephone displays the information when it receives the
relevant content notification.
Tone Settings
Enable Holding Tone
When turned on, a tone plays when the call is held.
Enable Call Waiting Tone
When turned on, a tone plays when the call is waiting.
Play Dialing DTMF Tone
Plays DTMF tone on the device when the user presses telephone digits

Table of Contents

Related product manuals