Alcatel-Lucent H2 DeskPhone - Page 84

H2 DeskPhone
H2P DeskPhone
8AL90394ENAAed01 84 /111
Specific Server Type
Sets the line to collaborate with specific server type.
SIP Version
Sets the SIP version.
Anonymous Call
Standard
Sets the standard to be used for anonymous.
Local Port
Sets the local port.
Ring Type
Sets the ring tone type for the line.
Enable user=phone
Sets user=phone in SIP messages.
Use Tel Call
Sets use tel call.
Auto TCP
Uses TCP protocol to guarantee usability of transport for SIP messages
above 1500 bytes.
Enable Rport
Sets the line to add rport in SIP headers.
Enable PRACK
Sets the line to support PRACK SIP message.
DNS Mode
Selects DNS mode, A, SRV, NAPTR.
Enable Long Contact
Allows more parameters in contact field per RFC 3840.
Enable Strict Proxy
Enables the use of strict routing. When the telephone receives packets from
the server，it will use the source IP address, not the address in via field.
Convert URI
Converts non-digits and alphabet characters to %hh hex code
Use Quote in Display
Name
Whether to add quote in display name.
Enable GRUU
Supports Globally Routable User-Agent URI (GRUU).
Sync Clock Time
Time Sync with server.
Enable Inactive Hold
With the post-call hold capture package enabled, you can see that in the
INVITE package, SDP is inactive.
Caller ID Header
Sets the caller ID header.
Use 182 Response for
Call waiting
Sets the device to use 182 response code at call waiting response.
Enable Feature Sync
Feature Sync with server.
Enable SCA
Enables/disables SCA (Shared Call Appearance)
CallPark Number
Sets the CallPark number.
Server Expire
Sets the timeout to use the server.
TLS Version
Chooses TLS Version.
uaCSTA Number
Sets uaCSTA number.
Enable Click To Talk
With the use of a special server, click to call out directly after enabling.
Flash mode
Chose flash mode, normal or SIP info.
Flash Info Content-Type
Sets the SIP info content type.
Flash Info Content-Body
Sets the SIP info content body.
PickUp Number
Sets the scramble number when Pickup is enabled.