Alcatel-Lucent OmniPCX Office Installation Manual

This option does not allow the connection of DECT base stations, 4070 IO/EO,
Alcatel-Lucent 9 series sets or Alcatel Reflexes sets with V24/CTI Interface Module, S0
Interface Module or AP Interface Module.
Note:
IP Touch sets cannot be connected to a hub.
Interface classification
- UA link: TBTS
- Hub/Alcatel-Lucent 9 series or Alcatel Reflexes 1 to 3 : TBTS
Maximum distances between Alcatel-Lucent OmniPCX Office Communication
Server and sets
- 0,4 mm cable: 325 m
  ()
          
4-113

Alcatel-Lucent OmniPCX Office Specifications

General

VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Humidity	10% to 90% non-condensing
Type	IP PBX
Maximum Trunks	Up to 60
Voice codecs	G.711, G.729
Network Interfaces	10/100 Ethernet
Weight	Varies depending on the model/configuration