- 1 mouse
- 1 serial port (connection to Alcatel-Lucent OmniPCX Office Communication Server for data
transfer)
- 1 Ethernet board (IP mode only; not required when there is a V24 serial port connection to
Alcatel-Lucent OmniPCX Office Communication Server)
- 64K (1 B-channel), or 128K (2 B-channels) PPP-compatible ISDN modem, or V34 modem
for remote access
Note:
Before installing OMC, the framework .NET must be installed.
6.2.2.2 Installing the OMC Software
The OMC software is installed from a CD-ROM.
Install the application by choosing options in the various windows.
When installation is finished, you access the application either:
- by double-clicking on the new icon created on the Windows desktop, or
- by selecting Start -> Program -> Alcatel-Lucent OmniPCX Office Communication
Server -> OMC XXX yy.z. The window Welcome to OMC appears.
6.2.3 Accessing the System
6.2.3.1 System Password
Important:
System Password management policy
Basic rules have to be applied to the different passwords allowing an OMC connection to the
system. It is recommended to change the default Installer password for OMC Expert,
Administrator password for OMC EasyPlus and Operator password for OMC Easy.
Remember these passwords can also be used from the MMC-Station.
The following are the recommendations for good password management:
- Implement company policy to regularly update all system passwords
- Regularly change the passwords
- Avoid the use of simple passwords such as 12345678, 11111111, 00000000 etc…
- Never choose a word from everyday language. Attackers can use special dictionary cracking
software to retrieve these
- Never choose a word that is closely related to you:
• your company name
• your name
• your wife’s maiden name
• the name of your children or your pet,
• your favourite hobby, etc…
- Choose a different password for each connection level
Chapter
6
+
6-10
To Next Page
Loading...
Need help?
General
