Alcatel-Lucent OmniPCX Office Installation Manual

Additional information about these settings can be found at: http://windows.microsoft.com/en-
US/windows-vista/Phone-and-Modem-Options-setting-up-dialing-locations
4.15.1.7.7 Digit for External Line
Using OmniPCX Office Management Console (OMC)
Navigate to Numbering > Numbering Plans,
Select the Internal Numbering Plan tab and identify the Main Trunk Group
In this example, the access code for an external line is "0". For your specific installation, please
check with your OmniPCX Office system installer.
  ()
          
4-127

Alcatel-Lucent OmniPCX Office Specifications

General

VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Humidity	10% to 90% non-condensing
Type	IP PBX
Maximum Trunks	Up to 60
Voice codecs	G.711, G.729
Network Interfaces	10/100 Ethernet
Weight	Varies depending on the model/configuration