Alcatel-Lucent OmniPCX Office Installation Manual

4.1.1.2 Mounting in the 19" Rack
4.1.1.2.1 Recommendations
Before installing the system in a 19" rack, you must verify that:
- The maximum static load (given by the manufacturer) of the 19" rack is greater than the
overall weight of the equipment mounted or to be mounted in the rack.
- Moreover, the weight of the equipment must be evenly distributed between the brackets.
- If mounting the Alcatel-Lucent OmniPCX Office Communication Server platform results in
exceeding the load on the front supports (generally the total weight divided by two), the
platform must be placed on a fixed tray attached to the four supports of the rack.
Chapter
4
  ()
4-2
          

Alcatel-Lucent OmniPCX Office Specifications

General

VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Humidity	10% to 90% non-condensing
Type	IP PBX
Maximum Trunks	Up to 60
Voice codecs	G.711, G.729
Network Interfaces	10/100 Ethernet
Weight	Varies depending on the model/configuration