Chassis and Power Supplies Rack-Mounting
OmniSwitch 6860 Hardware Users Guide October 2022 page 3-41
3 Press the flange and spring clip until the flange clicks into place and the clip is in the in
(engaged) position.
4 Secure the flange to the chassis using the attachment screw (provided).
5 Repeat steps 1 through 4 for the flange on the opposite side of the chassis.
6 Attach rear bracket guide and rear bracket (OS6860N-P48Z/P48M models).
Clip in “In”
(engaged)
position
“CLICK”
Rear bracket guide
Rear bracket
To Next Page
Loading...
