58
2) You can define :
 The profile and the Outlook® folder to use for synchronizing contacts.
The default profile and Outlook® folder will be used for synchronizing 
unless you specify a folder and profile.
You can change the profile and folder used. You can define a profile for 
synchronizing the contacts. You are advised to create an Outlook® 
subfolder dedicated to your phone contacts and to work from this folder. 
This will help protect your general Outlook® contacts on your PC.
 The conflict policy (determines how the application should behave 
when different changes have been made on the phone and the PC) 
• the most recent modification replaces the oldest,
In some circumstances, if you are synchronizing with a profile connected 
to an Exchange server you may face a situation when a conflict is 
resolved incorrectly with the "last modified"? policy. Make sure that any 
profile modifications made have been submitted to the Exchange server 
before synchronizing
• the phone datas always replace the ones on the PC,
• the PC datas always replace the ones on the Phone,
• the modified datas on the phone are copied on the PC and modified 
datas on the PC are copied on the phone (the datas are duplicated),
• no synchronisation is done.
 The silent sync : you can choose to display or not the synchronization 
progress bar and the synchronization summary. 
 The port used by PC for synchronization : if default port cannot be 
used on the PC you can change it. 
If you modify the port used by the application, you have to do the same 
modification on the phone side.
Secured connection : while communicating between My IC Phone 
Synchronizer and the device, both unsecured HTTP or secured HTTPS 
protocols can be used. If you checked the "Use secured connection"? 
checkbox, HTTPS protocol is enabled. However, to manage this 
checkbox you should make sure the same secured protocol is set up in 
the device. Please contact your system administrator to find out which 
protocol is used in your device.
 URL for downloading the application updates.
 Startup: if enabled, the application will be run when Windows® starts
Besides Settings item, there are a few item that allow you to display the last synchronization 
summary, to create or delete a pairing between your phone and your PC, to open the application 
online help, to display information on the application version or to exit the application.