Alcatel-Lucent OmniTouch 8082 - Synchronizer Phone Configuration and Sync Process

59
 Configuring the phone
11.7
Synchronize your phone and your PC
Before starting synchronization please make sure both the phone and PC software are properly configured.
 Start synchronization
If not deactivated in the application configuration (Silent Sync) you can see the synchronization summary on the
screen.
Settings
Application
Synchronization
PC address
Enter the IP address or the complete network name on which the synchronization application is
installed.
PC port
This data defines the port used on the PC for synchronization. The port must be the same as the
one filled in the PC application.
Warning
when
exceed
Choose if you wish to be informed when a maximum number of items for synchronization is
reached (the default setting is 500 items but this may have been changed by the administrator -
ask your administrator for the maximum number of contacts).
If you see this warning during synchronization you may lose some of your items because they have
not been synchronized.
Sync.
button
Choose to display the synchronization button in the applications bar of your My IC Phone.
Back to homepage
If you try to start the synchronization before configuring it, you will access the Synchronization
settings
Synchronization (if enabled in the synchronization settings)
OR
Settings
Application
Synchronization
Synchronization : start
During the synchronization, you can at anytime:
- see synchronization progress and phases,
- display details of synchronized items,
- cancel the synchronisation.
The synchronization summary lists all the synchronized items.
From the application menu on the PC (Task bar), you can see at anytime the summary from the last
synchronization.