7. Programming your telephone
7.1. Initializing your voice mailbox
Light flashes
Enter your personal code then record your name according to voice guide instructions
Your personal code is used to access your voice mailbox and to lock your telephone.
Your personnal code is composed by 4 digits. A weak personnal code will be rejected by the system:
- Identical 4 digits (0000, 1111,)
- A simple sequence of 4 digits (0123, 1234,)
7.2. Customizing your voice greeting
You can replace the greeting message by a personal message
Voice mail
Personal code
Perso option Greeting msg Perso greeting Record message
End End of recording
Use one of the following different ways
o Accept Apply
o Restart Re-record a message
o Replay Replay message
To return to the default message
Normal prompt
7.3. Modify the password for your phone set
Reach the "Menu" page
Settings Phone Password
Old code (4 digits)
Apply
New code (4 digits)
Apply
Enter new password again to confirm
Apply
This code acts as a password controlling access to programming functions and the user ‘Set Locking ‘
function (code by default: 0000).
To Next Page
Loading...
Need help?
General
