Acceptance of the programming is displayed
7.22. The Tandem configuration
This configuration lets you group two sets under a single call number. Your set is then the main set
and the second set, usually a DECT set, is the secondary set. Each set has its own directory number,
but the tandem number is that of the main set. When you receive a call, the two sets ring
simultaneously. When one of the sets answers, the other set stops ringing. When all the lines of the
main set are busy, the secondary (DECT) set does not ring. The secondary set can still be called by its
own number, but in this case, the tandem function will no longer be taken into account. Most of the
functions are common to the two sets, for example: forwarding, meet-me reminder, the various
messages, etc., while others are specific to each set, for example: individual directory, last number
redial, out of service, set padlock, etc.
For more information regarding this configuration, contact the person in charge of your installation.
7.23. Create, modify or consult your intercom list (max. 10 numbers)
Reach the "Menu" page
Settings My services Interphony
Follow instructions given on display
To Next Page
Loading...
