8. Guarantee and clauses
8.1. Safety Instructions
Changes or modifications to the equipment not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Magnets could affect the functioning of pacemakers and implanted heart defibrillators. Keep a
safe distance between your pacemaker or implant defibrillator and the handset which includes
magnetic elements: 4 centimeters (1,6 inches) at least
To limit the risk of interference, people with pacemakers must keep the wireless telephone away
from their equipment (minimum distance of 15 cm/6 inches)
It is recommended to follow the standard acceptance procedures before using this equipment in
human safety critical areas (hospitals...).
The handset includes magnetic elements that may attract sharp metallic objects. To prevent
injury, before each use ensure sharp metallic objects are not stuck to the earpiece.
There is a danger of explosion if the battery is replaced incorrectly - use only the battery with the
reference 3GV28041AB (1.2V 1500 mAh) (Bluetooth® Handset only).
Battery charge (Bluetooth® Handset only): Charge the battery for about 16 hours before initial
use
Avoid using phones (other than cordless) during an electrical storm. There may be a remote risk of
electric shock from lightning
Do not use the device in environments where there is a danger of explosion
Do not plug this phone into an Integrated Services Digital Network (ISDN) connection or into a
regular Public Switched Telephone Network (PSTN) connection. This can result in severe damage
to the phone
Never allow your telephone to come into contact with water
To clean your telephone, use a soft damp cloth. Never use solvents (trichlorethylene, acetone,
etc.) which may damage the plastic parts of your telephone. Do not use aerosol cleaners.
This product is intended to be connected to the PABX via the LAN (10/100/1000 MB)
If you are connected to a POE connection do not use AC power supply
The PoE (Power over Ethernet) devices that supply or receive power and their connected cables
must all be completely indoors.
The RJ-45 jack is not used for telephone line connection
The OmniTouch™ 8082 My IC Phone also offers a Bluetooth® Radio Interface for the Bluetooth®
handset or other Bluetooth® Devices.
8.2. Regulatory Statements
Marking
This equipment is in compliance with the essential requirements of R&TTE Directive 1999/5/EC and
with Directive 2011/65/UE (ROHS).
The Declaration of Conformity may be obtained from:
Alcatel-Lucent 3 avenue Octave Gréard 75007 Paris, France
ebg_global_supportcenter@Alcatel-Lucent.com.
To Next Page
Loading...
