Status of the instant messages
Once the instant message has been sent, the message is stored in the 'Sent' tab of the instant message
feature in the messaging portal. The status of the message is as follows:
• Press the associated softkey.
• Press the associated softkey: IM
Consulting instant messages
You are notified of a new event when the message key is flashing.
• Access the messaging portal.
• Select the instant message feature (depending on your phone, use touchscreen or the associated
softkey).
• Enter your password if required.
• Select one of the following tabs: new messages, received messages, sent messages or all
messages. Use left and right navigation key or press directly on the tab if your phone is equipped
with a touch screen.
• Select the message you want to read (depending on your phone, use the touchscreen or
navigation keys to position the cursor on the message).
• Select the instant message.
• Once the instant message is read, you can:
Answer the instant message by pressing the associated softkey.
Delete the instant message by pressing the associated key.
Press OK to call the sender of the instant message.
When a message is read, the status of the message changes from unread to read on both sides (on the
recipient side and the sender side).
You can use the filter key to consult messages sent by or to a particular contact. For example, when you
are on a message sent by a contact, pressing the filter key shows only messages sent to or by that
contact.
Acknowledge new instant messages
Once a new instant message is read, it is automatically acknowledged. However, you can acknowledge
all new instant messages without reading them.
• Press the associated softkey.
• Press the associated softkey: New IM
•
All new instant messages are acknowledged
To Next Page
Loading...
