Programming your telephone
Initializing your voice mailbox
• Light flashes.
•
• Enter your personal code then record your name according to voice guide instructions.
Your personal code is used to access your voice mailbox and to lock your telephone.
Your password has 6 digits. A weak personal code with 6 identical digits (000000, 111111, etc.) or a
simple sequence of 6 digits (012345, 123456, etc.) will be rejected by the system. After a system
upgrade, the password may still have only 4 digits. For security reasons, we recommend you use a
password with 6 digits. Contact your installer for more information. The list of weak passwords provided
does not contain all the possibilities.
Customizing your voice greeting
You can replace the greeting message by a personal message.
• Reach the 'Menu' page.
• Settings Mailbox
• You can listen to the greeting, customize the greeting and set the default greeting (Listen, Record
name).
• You can replace the greeting message by a personal message (Pers message).
• You can choose between two modes: the automated attendant or recorded greeting (Mode
Record mode/Single mode)
• You can pause, resume or stop the recording at any time.
Modifying your personal code
• Reach the 'Menu' page.
• Settings Options Password
• Old code (6 digits).
• New code (6 digits).
•
As long as your voice mailbox has not been initialized, personal code is 515151.
Your password has 6 digits. A weak personal code with 6 identical digits (000000, 111111, etc.) or a
simple sequence of 6 digits (012345, 123456, etc.) will be rejected by the system. After a system
upgrade, the password may still have only 4 digits. For security reasons, we recommend you use a
password with 6 digits. Contact your installer for more information. The list of weak passwords provided
does not contain all the possibilities.
To Next Page
Loading...
