Programming direct call keys (Perso page/F1 and F2 keys/Add-on module)
123<>abc: If your set is not provided with a magnetic keyboard, use the alpha-numeric keyboard to
enter letters. Use the alpha-numeric keyboard key to switch between the numeric and alphabetic
keyboard. When in alphabetic mode, the LED corresponding to the key remains lit up.
Depending on your desk phone, you can program:
• Softkeys of the Perso page.
• Keys/softkeys of the add-on module.
• F1 and F2 keys.
• Programmable keys with LED and paper.
• Programmable keys with LED and paper.
Led behavior may differ depending on the system configuration. For more information, contact
your installer or administrator.
If the key is not programmed yet:
• Select the key to program.
• Name: enter the name of the key.
•
• Number: enter the number to associate with the key.
•
•
If the key is already programmed:
• (Or Settings Keys)
• Select the key to program.
• Name: enter the name of the key.
•
• Number: enter the number to associate with the key.
•
•
Modifying direct call keys
• (Or Settings Keys)
• Select the key to modify.
• Name: enter the name of the key.
•
• Number: enter the number to associate with the key.
•
•
•
To Next Page
Loading...
