Before a Bluetooth® headset can be used, it must be correctly paired to the terminal. Before performing
the pairing operation, the headset must be in detectable mode.
• Use one of the following:
o
o (long press) Bluetooth®
• Search devices
Searching for Bluetooth® equipment. Wait for the detected equipment type and address to be
displayed
• Select the relevant equipment.
• Add
• Enter the PIN code of the headset*.
• Confirm Acknowledgement message and display of the headset icon on the terminal screen.
*Refer to the user documentation supplied with the headset.
: This icon is only available on the 8078s Premium DeskPhone.
Using a Bluetooth® Wireless Technology headset
This feature is only available with compatible Bluetooth® desk phone. Otherwise the corresponding
menu is not displayed or is inactive. Refer to the user documentation supplied with the headset.
Display all paired Bluetooth® devices
This feature is only available with compatible Bluetooth® desk phone. Otherwise the corresponding
menu is not displayed or is inactive.
• Use one of the following:
o
o (long press) Bluetooth®
• Devices
Display of the different equipment paired.
: This icon is only available on the 8078s Premium DeskPhone.
Improve the Bluetooth® audio quality in a high Wi-Fi density environment
If a Wi-Fi network interferes the Bluetooth® signal, you can activate the following option to improve the
Bluetooth® audio quality:
• Use one of the following:
o
o (long press) Bluetooth
• Noise cut: check this option.
Note that the autonomy of the Bluetooth® device will decrease if the option is enabled.
To Next Page
Loading...
