o VPN Tftp Use TFTP servers, tftp1, tftp2,port: if the TFTP servers are required, activate
this option and enter the addresses and port of the TFTP servers.
o VPN Auth Use Authentification, User, Pass: activate this option if a logon to the VPN
server (username and password) is required. The VPN authentication can be disabled in
case a specific PSK is used for each remote worker.
o VPN Pincod Request Pin on Boot: if this option is activated, the PIN code is required
when you boot your desk phone. We recommend you activate this option.
o Select this icon to return to the main menu.
o Select this icon to save parameters.
• The VPN configuration is saved and the main menu is displayed.
• Select this icon to exit the configuration menu. The desk phone restarts.
• Enter the PIN code if you have selected the option (Request Pin on Boot).
• Validate.
• Your desk phone is ready for remote working.
If you leave the PIN code request menu when the phone is starting, the phone will start without VPN
activated.
If an error occurs when your phone is running in remote mode, a popup is displayed with an error
message. Please note this message to send to your administrator.
Change the configuration
You have to change a parameter of the VPN configuration.
• Restart the desk phone (unplug and plug in the power jack if you are using an external power
adapter or the Ethernet connector LAN).
• When the desk phone displays the 'Step 2' during the boot, repeatedly press the '*' and '#' keys in
succession until a menu is displayed.
• VPN (scroll down the menu).
• Select a submenu to change the configuration (VPN Config, VPN Tftp, VPN Auth, VPN Pincod).
• Enter your PIN code (If an administrator password is defined by the system, you can use it to
access to the VPN configuration by selecting: Use Password).
• Validate.
• Change parameters.
• Select this icon to save parameters.
• The VPN configuration is saved and the main menu is displayed.
• Select this icon to exit the configuration menu. The desk phone restarts.
• Enter the PIN code if you have selected the option (Request Pin on Boot).
• Validate.
• Your desk phone is ready for remote working.
If an error occurs when your phone is running in remote mode, a popup is displayed with an error
message. Please note this message to send to your administrator.
To Next Page
Loading...
